CCI Pattern Recognition for Woodies

[hjahend]

cci forecaster

Thanks Bertrand,
I intend to do that in the weekend.
But I already had similar problems when I updated to NT7 V21 for the first time.
I had also contact with support than and they recommended a complete reinstall.
After that I had to import all mij custom indicators again and re configure my charts.
Quite a lot of work. I hope it can be done simpeler this time?

[NinjaTrader_Bertrand]

I understand the situation Harry - if you take out the CCI Forecaster and related codes you copied in manually - do all your residual files compile well?

[hjahend]

cci forecaster

Hi Bertrand,
yes, everything works fine.
The only problem is that I cannot compile the cciforecaster .cs file or import it via the zip file

thanks
Harry

[NinjaTrader_Bertrand]

Harry, ok what I would try then is opening any indicator > right click > References > Add and remove the NinjaTrader Vendor dll from the list > then readd it fresh from the Bin > Custom folder and recompile the scripts. Now restart NT7 fresh and reimport the downloaded zip from the forum - any change?

Thanks

[hjahend]

cc forecaster

Thanks Bertrand,
I will try that in the weekend. For clarification: do i edet the sricpt of an indicator under the tools-edit function of NT7 or do you mean something else to do?
Harry

[NinjaTrader_Bertrand]

Correct, you would just open any NinjaScript in the editor up to be able to follow the steps I posted.

[hjahend]

cci forecaster

I put the two CCI Forecaster .cs files in the custum file section and added the Vendor dll. Than tried to compile it but the same error message s befor.

After removing the CCI Foreaster .cs files from the custom indicator section all other indicators in that section compiled well. However Befor removing the mentioned files I had the error message, so in my view it is definitely something within the CCI Foreaster .cs files that is missing or wrong (see my previous remark of the compiling error specification).
thanks
Harry

[hcham]

CCI_forcaster error message with latest update

I've just update from Ninja Trader 6.5.1000.15 to NT 6.5.1000.18 and run into the following error messages with the update.


10/5/2010 9:19:53 AM,Default,Failed to restore Market Analyzer column 'NinjaTrader.MarketAnalyzer.IndicatorColumn'. Most likely (a) the implementation changed or (b) one or more properties have been renamed or removed or (c) the custom assembly which implements this indicator no longer is there.,
10/5/2010 9:19:52 AM,Default,Failed to restore indicator 'NinjaTrader.Indicator.CCI_Forecaster_DE'. Most likely (a) the implementation changed or (b) one or more properties have been renamed or removed or (c) the custom assembly which implements this indicator no longer is there.,

When I run compile, the following error occur.
,Metadata file 'C:\Program Files\NinjaTrader 6.5\bin\NinjaTrader.Core.dll' could not be found,CS0006 - click for info,0,0,
,Metadata file 'C:\Program Files\NinjaTrader 6.5\bin\WilsonORMapper.dll' could not be found,CS0006 - click for info,0,0,

Why there is such a dramatic change from .15 to .18 ?

Appreciate for any assistant!

[NinjaTrader_Bertrand]

Please readd those missing reference dll's fresh - open any indicator source and right click in the code > References > Add, then point to the NT install folder under Program Files to readd the needed DLL's to the list. When done, press F5 in the code to compile and those errors should be gone then.

[hjahend]

cci forcaster problem

Hi Bertrand,
Please see my post of 09-18-2010 10:40 AM below.
I still have no luck installing the indicator cocrectly because I keep getting the same error message when compiling.
any suggestions ?
thanks
Harry

[NinjaTrader_Bertrand]

Harry, can you please contact me at support at ninjatrader dot com with your exact file you try using and a screenshot of the compile errors you get?

Thanks

[hcham]

Please readd those missing reference dll's fresh - open any indicator source and right click in the code > References > Add, then point to the NT install folder under Program Files to readd the needed DLL's to the list. When done, press F5 in the code to compile and those errors should be gone then.

Thanks for the response.
FYI...
I am running Window 7 64 bit and the References was pointed to Program Files instead of Program Files(x86). I need to remove the ones pointing to Program Files for the compile to work.

Thanks again!.

[NinjaTrader_Bertrand]

Ok, thanks for the update, glad to hear it.

[gg80108]

Any CCI ers

anyone seen this error with the NT7 export of the cci autor trader,, its in the forecaster indicator

Error on calling 'OnBarUpdate' method for indicator 'CCI_Forecaster_DE' on bar 34: 'MRO' on bar 0 threw exception: You are accessing an index with a value that is invalid since its out of range. I.E. accessing a series [barsAgo] with a value of 5 when there are only 4 bars on the chart.

[Tommy]

Pattern recognition

Hi,
I see that you are interested in Pattern recognition so I will give you link where you can find several books about it, maybe I can help you with your problems or research.
The present books are intended to collect representative researches around the globe focusing on low-level vision, filter design, features and image descriptors, data mining and analysis, and biologically inspired algorithms.
Books are free to download.
This is link: http://www.intechopen.com/search/?q=Books:%20Pattern%20recognition
Greetings!