Add 6N ?

[jerrydeng]

there's no 6N in NT6.5 instrument manager, can you add it ?

[NinjaTrader_Jason]

Hello jerrydeng,

NinjaTrader comes pre-loaded with the most commonly traded instruments however, you may find the need to add an additional instrument. Please follow the instructions below to add an instrument in the Instrument Manager.

• From the NinjaTrader Control Center window select the menu Tools > Instrument Manager
• Press the "New" button
• *Enter in instrument specific information and select the appropriate exchange (add Default exchange for equities in addition to the actual exchange)
• Fill in any relevant information under the "Misc" tab such as symbol mapping for your target connectivty provider
• Press the "OK" button

* If you wish to add an equity, this can be accomplished without following the steps above. Just open a chart (for example) and start typing in the symbol and a new instrument is automatically created.

The instrument is now added to the master instrument list. Please follow the instructions below if you want to add this instrument to an instrument list.

• Select the instrument list you wish to add the instrument to via the "Instrument lists" drop down list in the upper left hand corner
• Select the exchange (Default recommend for equities) as this will route orders to your broker smart routing system
• Select the appropriate expiration date if this is a futures instrument
• Press the "<" button to add the instrument to the list

You are now complete and can press the "OK" button.

[jerrydeng]

yes, i added, but there's no data refreshed.

[NinjaTrader_VinceB]

Can you check the log tab for error messages. Also make sure you have entered a Symbol map for the provider.

In addition, make sure that all specifications are entered correctly.

Otherwise send a screenshot of your settings.

To send a screenshot press Alt + PRINT SCREEN to take a screen shot of the selected window. Then go to Start--> Accessories--> Paint, and press CRTL + V to paste the image. Lastly, save as a jpeg file and send the file as an attachment.

[jerrydeng]

hello, see the attachment i sent

Can you check the log tab for error messages. Also make sure you have entered a Symbol map for the provider.

In addition, make sure that all specifications are entered correctly.

Otherwise send a screenshot of your settings.

To send a screenshot press Alt + PRINT SCREEN to take a screen shot of the selected window. Then go to Start--> Accessories--> Paint, and press CRTL + V to paste the image. Lastly, save as a jpeg file and send the file as an attachment.

i have send 2 screenshot of my settings, and 1 screenshot error info. my Misc setting is 6N or RY in Zen-fire section. help me please, thank you.

[jerrydeng]

hello, see the attachment i sent

Can you check the log tab for error messages. Also make sure you have entered a Symbol map for the provider.

In addition, make sure that all specifications are entered correctly.

Otherwise send a screenshot of your settings.

To send a screenshot press Alt + PRINT SCREEN to take a screen shot of the selected window. Then go to Start--> Accessories--> Paint, and press CRTL + V to paste the image. Lastly, save as a jpeg file and send the file as an attachment.

by the way, my Misc setting is 6N or RY in Zen-Fire section.

[jerrydeng]

6N error

see the attachment

[jerrydeng]

would you help me , thank you.

[NinjaTrader_Kyle]

Hi jerrydeng,

In the Instrument Editor's Misc tab, under the Symbol Map section, what value have you entered next to Zen-Fire?

[jerrydeng]

for nzdusd, i enter 6N next Zen-fire.

[jerrydeng]

i don't know why there's always no answer for my question ?