Details:
1) Create a new instrument in Instrument Manager
2) Import tick data from .csv file to populate new instrument
3) Setting type = tick, value = 1... Plot new instrument and print chart data to log file to compare to imported tick data.
Problem:
None of the data sets match! The csv import file data != the printed new instrument chart data != the new instrument plot data.
Sample data:
1) Here's is the csv import tick data file:
20130916 130306;7.14880;1
20130916 130323;7.14560;1
20130916 130323;7.14560;1
20130916 130323;7.14980;1
20130916 130323;7.15820;1
But, when I import this data set into a new instrument I get some really strange results
2) Following import of the data above into a custom instrument here is a print log of the tick data. Prices occurring on the same time stamp appear to have been dropped.
2013-09-16 13:01:37 7.839
2013-09-16 13:03:07 7.828
2013-09-16 13:03:14 7.7692
2013-09-16 13:03:18 7.7372
2013-09-16 13:03:21 7.7068
2013-09-16 13:03:22 7.69
2013-09-16 13:03:33 7.6364
3) Chart data: Just reading off of the 1-tick chart of the imported data I get different increments than in the 2 cases above:
--Between 20130916 130306 and 20130916 130323 I have 21 records on the 1-tick chart of the new instrument vs a total of 5 records in the original csv data set.
Comment