Zenfire - IQfeed

[Djinn]

Hi,

I have 2 data feeds first connected feed is Zenfire from my Broker Mirus and second feed from IQfeed.

I have 2 charts open CL 07-11 and CL ##-## how can i ensure that CL ##-## is only IQFeed data.

Thanks

[NinjaTrader_Jason]

Hello Djinn,

Please see the link below that provides information when using multiple data feeds simultaneously.

http://www.ninjatrader.com/support/helpGuides/nt7/multiple_connections.htm

You will receive all futures data from the data feed you connect to first, so please connect to IQFeed first and Zen-Fire second. That way, you ensure that all futures data is received from IQFeed.

[Djinn]

Zenfire- IQfeed

Thanks Jason,

I think i wasn't clear enough. My goal is to have

CL 07-11 only Zenfire for real time with NT market data for history

and

CL ##-## only IQfeed for Real Time and History.

Thanks

[NinjaTrader_Jason]

Unfortunately that is not supported. You cannot select a data feed per instrument. When connected to multiple data feeds, NinjaTrader will receive data from the first connected connection. Only if the first connection does not support an instrument type (futures, stock, forex or index), NinjaTrader will receive data from the second connection.

However, you can try the following workaround. Please connect to IQFeed first and only load a CL ##-## chart, so all historical data is loaded from IQFeed. Disconnect IQFeed and connect to Zen-Fire first and IQFeed second.

Zen-Fire does not support real-time data for the CL ##-##, so you will receive real-time data for the CL 07-11 from Zen-Fire and you will receive real-time data for the CL ##-## from IQFeed. If this will not work, I can only suggest to connect to IQFeed first and Zen-Fire second.