Horizontal line draw issue

[DeskTroll]

Just noticed on NT 7.10 that when trying to adjust Y axis using data input tab horizontal line value reverts to initial value, for example I place a line at "800" on the Y axis then double click and it shows "801.1" in the data tab, then I input "800" in the data field click apply and value reverts to "801.1". Same on all charts.

Zenfire / eSignal

[NinjaTrader_Jason]

Hello DeskTroll,

I tested the Data-tab of a Line object and I was able to reproduce the addition of 0.001 when modifying an Y-value. However, the line was not drawn 1 point above the value. Can you please decompress the Y-axis and draw another line. Check if the Y-axis values are reported correctly under the Data-tab.

I will report my findings to Development. Once there is news regarding the matter, I will let you know.

[DeskTroll]

Hi Jason,

Did as you requested and got the same result...value reverted to what the original value was when first drawing the line.

[NinjaTrader_Jason]

Unfortunately I am not able to reproduce this behavior. Once I change the value and click Apply, the new value is reflected however with some additional value.

Can you please try an ES 03-10 chart. Please draw a line and change the Y-axis value of the starting point and click Apply. It should list the new value.

[DeskTroll]

Tried it on an ES chart and had the same issue as before.

[NinjaTrader_Jason]

Can you please rebooot your PC and start NinjaTrader. Create a brand new chart and draw a Line.

Double click the line and select the Data-tab. Remove all information next to 'Start Y' and enter a new value. Click Apply.

Does the old value still reflect in the window?

I am not able to reproduce this on my end. For example, I draw a line from 1134.792 to 1133.201. I change 1134.792 to 1133 and I click Apply. The value will be reflected as 1133.002, but not as 1134.792.