Custom Indicators not working with B9

[gyoung]

Guys,
I have a couple of indicators that I have modified with your Multi Color Plot approach that are not working with the latest release.
The indicators essentially plot a flat line with B9.
Worked fine with B8
I am using LinReg and WMA.

[NinjaTrader_Bertrand]

gyoung, thanks - checked the sample the we have on my end and it works fine - http://www.ninjatrader-support2.com/...89&postcount=1

Could you please check with this basic one, too?

[gyoung]

Bertrand,
I tried your sample and it works fine in the price action panel.
Try moving it to its own panel and let me know what you see.

I moved it to panel 5(on my chart) and it is essentially flat. Looks like it is calculating correctly just not setting the y axis correctly when you assign it to a new panel.

[NinjaTrader_Bertrand]

I tried moving it to separate subpanels and also used it on MultiSeries charts...so far did not see scaling issues - what scaling options are you using?

[NinjaTrader_Bertrand]

I think here's what you see - different instruments in MultiSeries chart - you 'grab' the indicator and move it to a different subpanel using a different instrument. This does not change the input series and thus a new left scale would be for example generated, thus the plot seems off?

[gyoung]

Here are two charts that I applied the example to.

It works with the ES but not 6E.

I just created these charts this morning.

Is there a setting I am missing?

[gyoung]

Bertrand,
If you take a look at the post - NT7 Beta 9 MACD scale problem -
I believe I have the same issue here.
I looked at the screen properties and they are set to ScreenDateRange

[NinjaTrader_Bertrand]

gyoung, thanks could reproduce the issue on 6E, we'll take a look into.

[NinjaTrader_Bertrand]

For the 'squishing' of the MACD in the subpanel, please ensure you use a smaller upper lower margin than on the price panel, i.e 0.1 % should do it...

[gyoung]

For the 6E, I was able to set the Right Scale Margin /Lower/Upper to be 0.0001 percent and this seems to resolve the scaling problem.
Thanks for your help.

[NinjaTrader_Ray]

Here are two charts that I applied the example to.

It works with the ES but not 6E.

I just created these charts this morning.

Is there a setting I am missing?

After further investigation, there does seem to be something wrong here and we will look further into it.

[gyoung]

Ray,
I thought I had an interim fix by changing the Margin Upper and Lower values but that does not work consistently with some of my other indicators.

Looks like you have an axis scaling problem.

Will wait for the next beta to test further.

[NinjaTrader_Ray]

We have identified the issue and it is resolved for our next update. Thanks for reporting this.