Announcement

Collapse
No announcement yet.

Partner 728x90

Collapse

What am I doing wrong?

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • ETFVoyageur
    replied
    The middle of the three cases -- start normally and then launch VS from the editor displays the exceptions. If VS is not involved at all I don't know whee to look for the equivalent of the VS Output window.

    Leave a comment:

  • NinjaTrader_Brett
    replied
    problem just starting from VS? Or is it also running into issue starting up normally?

    Leave a comment:

  • ETFVoyageur
    replied
    Good suggestion. A bit time-consuming, but I did it. Did not affect the problem, though.

    Leave a comment:

  • koganam
    replied
    Originally posted by ETFVoyageur View Post
    I just ran through the sequence that shows the exceptions and got them. None show up in the trace file, though. I just emailed you the trace file, as you asked.

    Next I tried to start NT from VS (the stuff you zipped up a bit back). That has been working fine, up until recently. The NT workspace that was to get started has just a Control Center, and nothing else -- could not be simpler. Did not get far enough to make a trace file. Ended with the Beta splash screen and a dialog saying "ArgumentException was unhandled" with the additional information: "Requested value 'Replay' was not found" Here's the Output window content:
    Code:
    Exception thrown: 'System.ArgumentNullException' in System.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
WARNING: Session Break (Version 8.0.0.12)
Cbi.Globals.MachineId: True/True 302EC07CD02EAA7D24DAC6D0CAB76B32
Cbi.Licence.Verify5
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.ArgumentException' in mscorlib.dll
    and the call stack
    Code:
    >    mscorlib.dll!System.Enum.EnumResult.SetFailure(System.Enum.ParseFailureKind failure, string failureMessageID, object failureMessageFormatArgument)    Unknown
     mscorlib.dll!System.Enum.TryParseEnum(System.Type enumType, string value, bool ignoreCase, ref System.Enum.EnumResult parseResult)    Unknown
     mscorlib.dll!System.Enum.Parse(System.Type enumType, string value, bool ignoreCase)    Unknown
     [Native to Managed Transition]    
     [Managed to Native Transition]    
     NinjaTrader.VMRuntime.dll!lbU=.abc=.hrc=(ref object h7c=, object[] iLc=, bool ibc=, System.Reflection.MethodBase irc=, bool i7c=)    Unknown
     NinjaTrader.VMRuntime.dll!lbU=.CLs=.DLs=(lbU=.Arc= value)    Unknown
     NinjaTrader.VMRuntime.dll!lbU=.yrY=.z7Y=(lbU=.Arc= 0LY=)    Unknown
     NinjaTrader.VMRuntime.dll!VMRuntime.Libraries.CSVMRuntime.QrY=(lbU=.tbY= Q7Y=, lbU=.Arc= RLY=)    Unknown
     NinjaTrader.VMRuntime.dll!VMRuntime.Libraries.CSVMRuntime.PrY=(System.Reflection.Assembly P7Y=, string QLY=, object[] QbY=)    Unknown
     NinjaTrader.VMRuntime.dll!VMRuntime.Libraries.CSVMRuntime.RunMethod(string PQYB, object[] PgYB)    Unknown
     NinjaTrader.Core.dll!NinjaTrader.Cbi.LicenseData.LicensedProviders.set(NinjaTrader.Cbi.Provider[] value)    Unknown
     Microsoft.GeneratedCode!Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderLicenseData.Read5_LicenseData(bool isNullable, bool checkType)    Unknown
     Microsoft.GeneratedCode!Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderLicenseData.Read6_LicenseData()    Unknown
     [Native to Managed Transition]    
     [Managed to Native Transition]    
     System.Xml.dll!System.Xml.Serialization.TempAssembly.InvokeReader(System.Xml.Serialization.XmlMapping mapping, System.Xml.XmlReader xmlReader, System.Xml.Serialization.XmlDeserializationEvents events, string encodingStyle)    Unknown
     System.Xml.dll!System.Xml.Serialization.XmlSerializer.Deserialize(System.Xml.XmlReader xmlReader, string encodingStyle, System.Xml.Serialization.XmlDeserializationEvents events)    Unknown
     System.Xml.dll!System.Xml.Serialization.XmlSerializer.Deserialize(System.Xml.XmlReader xmlReader)    Unknown
     NinjaTrader.Core.dll!NinjaTrader.Cbi.License.Verify(System.Action<string, NinjaTrader.Cbi.InvalidCode, bool> errorCallback)    Unknown
     NinjaTrader.exe!NinjaTrader.AppHelper.OnStartup.AnonymousMethod__0(object o)    Unknown
     mscorlib.dll!System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state, bool preserveSyncCtx)    Unknown
     mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state, bool preserveSyncCtx)    Unknown
     mscorlib.dll!System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()    Unknown
     mscorlib.dll!System.Threading.ThreadPoolWorkQueue.Dispatch()    Unknown
    I'm really mystified. Everything was working quite smoothly until very recently. I am not aware of changing anything other than a Windows update, but it worked for a couple of days after the update. It is hard to believe that NT is having serious problems or else I would not be the only one noticing it. Besides, I have completely reinstalled NT. It's hard to believe VS is causing the problems. As for my system, it's Windows 10 with all patches applied. Nothing else is having any problem that I can see. I ran several of MS' checking tools this morning (sfc, dism, chkdsk) and nothing detected any problems.

    I'm just mystified. My presumption is that I have messed up some simple little thing, though I don't see how that would affect the case where VS is started from the editor. That's all NT-approved procedure with nothing of mine involved.

    --EV
    Try reinstalling the correct .NET version.

    Leave a comment:

  • ETFVoyageur
    replied
    I just ran through the sequence that shows the exceptions and got them. None show up in the trace file, though. I just emailed you the trace file, as you asked.

    Next I tried to start NT from VS (the stuff you zipped up a bit back). That has been working fine, up until recently. The NT workspace that was to get started has just a Control Center, and nothing else -- could not be simpler. Did not get far enough to make a trace file. Ended with the Beta splash screen and a dialog saying "ArgumentException was unhandled" with the additional information: "Requested value 'Replay' was not found" Here's the Output window content:
    Code:
    Exception thrown: 'System.ArgumentNullException' in System.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
WARNING: Session Break (Version 8.0.0.12)
Cbi.Globals.MachineId: True/True 302EC07CD02EAA7D24DAC6D0CAB76B32
Cbi.Licence.Verify5
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.ArgumentException' in mscorlib.dll
    and the call stack
    Code:
    >    mscorlib.dll!System.Enum.EnumResult.SetFailure(System.Enum.ParseFailureKind failure, string failureMessageID, object failureMessageFormatArgument)    Unknown
     mscorlib.dll!System.Enum.TryParseEnum(System.Type enumType, string value, bool ignoreCase, ref System.Enum.EnumResult parseResult)    Unknown
     mscorlib.dll!System.Enum.Parse(System.Type enumType, string value, bool ignoreCase)    Unknown
     [Native to Managed Transition]    
     [Managed to Native Transition]    
     NinjaTrader.VMRuntime.dll!lbU=.abc=.hrc=(ref object h7c=, object[] iLc=, bool ibc=, System.Reflection.MethodBase irc=, bool i7c=)    Unknown
     NinjaTrader.VMRuntime.dll!lbU=.CLs=.DLs=(lbU=.Arc= value)    Unknown
     NinjaTrader.VMRuntime.dll!lbU=.yrY=.z7Y=(lbU=.Arc= 0LY=)    Unknown
     NinjaTrader.VMRuntime.dll!VMRuntime.Libraries.CSVMRuntime.QrY=(lbU=.tbY= Q7Y=, lbU=.Arc= RLY=)    Unknown
     NinjaTrader.VMRuntime.dll!VMRuntime.Libraries.CSVMRuntime.PrY=(System.Reflection.Assembly P7Y=, string QLY=, object[] QbY=)    Unknown
     NinjaTrader.VMRuntime.dll!VMRuntime.Libraries.CSVMRuntime.RunMethod(string PQYB, object[] PgYB)    Unknown
     NinjaTrader.Core.dll!NinjaTrader.Cbi.LicenseData.LicensedProviders.set(NinjaTrader.Cbi.Provider[] value)    Unknown
     Microsoft.GeneratedCode!Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderLicenseData.Read5_LicenseData(bool isNullable, bool checkType)    Unknown
     Microsoft.GeneratedCode!Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderLicenseData.Read6_LicenseData()    Unknown
     [Native to Managed Transition]    
     [Managed to Native Transition]    
     System.Xml.dll!System.Xml.Serialization.TempAssembly.InvokeReader(System.Xml.Serialization.XmlMapping mapping, System.Xml.XmlReader xmlReader, System.Xml.Serialization.XmlDeserializationEvents events, string encodingStyle)    Unknown
     System.Xml.dll!System.Xml.Serialization.XmlSerializer.Deserialize(System.Xml.XmlReader xmlReader, string encodingStyle, System.Xml.Serialization.XmlDeserializationEvents events)    Unknown
     System.Xml.dll!System.Xml.Serialization.XmlSerializer.Deserialize(System.Xml.XmlReader xmlReader)    Unknown
     NinjaTrader.Core.dll!NinjaTrader.Cbi.License.Verify(System.Action<string, NinjaTrader.Cbi.InvalidCode, bool> errorCallback)    Unknown
     NinjaTrader.exe!NinjaTrader.AppHelper.OnStartup.AnonymousMethod__0(object o)    Unknown
     mscorlib.dll!System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state, bool preserveSyncCtx)    Unknown
     mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state, bool preserveSyncCtx)    Unknown
     mscorlib.dll!System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()    Unknown
     mscorlib.dll!System.Threading.ThreadPoolWorkQueue.Dispatch()    Unknown
    I'm really mystified. Everything was working quite smoothly until very recently. I am not aware of changing anything other than a Windows update, but it worked for a couple of days after the update. It is hard to believe that NT is having serious problems or else I would not be the only one noticing it. Besides, I have completely reinstalled NT. It's hard to believe VS is causing the problems. As for my system, it's Windows 10 with all patches applied. Nothing else is having any problem that I can see. I ran several of MS' checking tools this morning (sfc, dism, chkdsk) and nothing detected any problems.

    I'm just mystified. My presumption is that I have messed up some simple little thing, though I don't see how that would affect the case where VS is started from the editor. That's all NT-approved procedure with nothing of mine involved.

    --EV

    Leave a comment:

  • NinjaTrader_Brett
    replied
    Some exceptions which are thrown and handled by NT are expected (e.g. wouldn't worry about the thread abort exceptions). I did a test on my side and I do not get those exceptions on compile/startup.

    Do you see the exceptions in the My Documents > NinjaTrader 8 > Trace > trace.txt file for the session you ran into this one, Could you send that my way so I could take a look at the trace.

    -Brett

    Leave a comment:

  • ETFVoyageur
    replied
    I shut down NT while VS as attached. I see a couple of ThreadAbortException's. I do not know whether or not they interfere with going down cleanly.
    Code:
    2016-09-01 10:54:35:101 Shutting down NinjaTrader
2016-09-01 10:54:35:101 Shutting down instrument management
2016-09-01 10:54:35:103 Shutting down instrument threads
2016-09-01 10:54:35:106 Shutting down BP thread
2016-09-01 10:54:35:106 Shutting down data recorder
2016-09-01 10:54:35:115 Shutting down file type watcher
2016-09-01 10:54:35:115 Shutting down ATI server
Exception thrown: 'System.Threading.ThreadAbortException' in System.dll
2016-09-01 10:54:35:127 Shutting down auto trade component
Exception thrown: 'System.Threading.ThreadAbortException' in NinjaTrader.Core.dll

    Leave a comment:

  • ETFVoyageur
    replied
    Grasping at straws, I rebooted. The toolbar icon is now correct. I still get the exceptions, though.

    --EV

    Leave a comment:

  • ETFVoyageur
    replied
    There is one irrelevant 2008 thread that search turns up. I also did not find anything useful via Google.

    I just went back and redid things as basically as possible. Pure vanilla, nothing special about me.
    • Uninstall NinjaTrader 8
    • Delete the NinjaTrader 8 folder (uninstall left it behind, presumably in case I had work there)
    • Run the .msi file to reinstall NT8 -- just accepted the default choices
    • Run NT8, declining its offer to carry forward NT7 settings
    • Bring up the editor
    • Set debug mode
    • Compile (F5)
    • Click on the editor button to run Visual Studio Community 2015, Update 3
    • VS attach to the NT process
    • Do F5 again in the NT editor
    • See the following output in the VS 'Output' window

    Code:
    Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.ArgumentNullException' in mscorlib.dll
    Note that what I did was totally vanilla. There are no settings or choices of mine involved, and there is no code of mine involved. Next I created a vanilla chart -- the only input I gave it was to specify the security symbol (SPY). That got me some more exceptions in the Output window.
    Code:
    Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.ArgumentNullException' in mscorlib.dll
Exception thrown: 'System.Xml.XmlException' in NinjaTrader.Core.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.Xml.XmlException' in NinjaTrader.Core.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
    Are all these exceptions expected? Is it really right that such simple basic actions in NT are generating these exceptions? If not, then I would appreciate any suggestions for how to fix the issue, or at least how to proceed.

    =====
    Are those NT's messages? If so, it would REALLY help if you would also provide the pathname it is looking for.

    =====
    I also wonder what is causing the toolbar icon to be a white rectangle instead of the NT icon that is its symbol with an "8" on it?

    --EV
    Last edited by ETFVoyageur; 09-01-2016, 08:43 AM.

    Leave a comment:

  • NinjaTrader_PatrickH
    replied
    Hello ETFVoyageur,

    Thank you for your post.

    I would recommend searching these messages specifically in a search engine to see the cause. The exceptions appear to occur for a number of reasons, so I would browse through the results of your search to see what possible causes there are and if you performed any of these.

    Leave a comment:

  • ETFVoyageur
    started a topic What am I doing wrong?

    What am I doing wrong?

    This has got to be so simple I'll be embarrassed to find what I am overlooking, but here goes.

    I have been doing just fine, doing my development in VS and running NT8 from there. "I did not change anything" but the setup no longer works. Obviously I did change something, but I have no idea what that could be. I even reinstalled NT8. I added my skin file, but made no other changes. In particular, I have not put any of my source files back into the tree, so the build is purely what comes with NT8. (FWIW: I am running Windows 10 with the latest update.)

    *) NT8 runs fine when run directly, so it would seem that NT8 and Widows are fine.

    *) Next I tried running Visual Studio from the NT Editor and attaching to the process. That went smoothly, but when I recompile in the editor the VS output window shows some exceptions. Is that normal? (Note that this step involves nothing other than what came with NT8 and a vanilla VS. No code of mine.)
    Code:
    Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.ArgumentNullException' in mscorlib.dll
    *) Then I went to what I really want to do, and what has been working well up until now -- running VS directly and starting NT8 from there. When I do so, NT8 gets started, but soon crashes. It runs long enough to put up its "Beta" splash screen. The next thing I see is a dialog saying "ArgumentException was unhandled", with detail "Requested value 'Replay' was not found." This is, regrettably, 100% reproducible.

    Here's the output window content:
    Code:
    Exception thrown: 'System.ArgumentNullException' in System.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
WARNING: Session Break (Version 8.0.0.12)
Cbi.Globals.MachineId: True/True 302EC07CD02EAA7D24DAC6D0CAB76B32
Cbi.Licence.Verify5
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.IO.FileNotFoundException' in mscorlib.dll
Exception thrown: 'System.ArgumentException' in mscorlib.dll
    Here is the stack:
    Code:
    >    mscorlib.dll!System.Enum.EnumResult.SetFailure(System.Enum.ParseFailureKind failure, string failureMessageID, object failureMessageFormatArgument)    Unknown
     mscorlib.dll!System.Enum.TryParseEnum(System.Type enumType, string value, bool ignoreCase, ref System.Enum.EnumResult parseResult)    Unknown
     mscorlib.dll!System.Enum.Parse(System.Type enumType, string value, bool ignoreCase)    Unknown
     [Native to Managed Transition]    
     [Managed to Native Transition]    
     NinjaTrader.VMRuntime.dll!lbU=.abc=.hrc=(ref object h7c=, object[] iLc=, bool ibc=, System.Reflection.MethodBase irc=, bool i7c=)    Unknown
     NinjaTrader.VMRuntime.dll!lbU=.CLs=.DLs=(lbU=.Arc= value)    Unknown
     NinjaTrader.VMRuntime.dll!lbU=.yrY=.z7Y=(lbU=.Arc= 0LY=)    Unknown
     NinjaTrader.VMRuntime.dll!VMRuntime.Libraries.CSVMRuntime.QrY=(lbU=.tbY= Q7Y=, lbU=.Arc= RLY=)    Unknown
     NinjaTrader.VMRuntime.dll!VMRuntime.Libraries.CSVMRuntime.PrY=(System.Reflection.Assembly P7Y=, string QLY=, object[] QbY=)    Unknown
     NinjaTrader.VMRuntime.dll!VMRuntime.Libraries.CSVMRuntime.RunMethod(string PQYB, object[] PgYB)    Unknown
     NinjaTrader.Core.dll!NinjaTrader.Cbi.LicenseData.LicensedProviders.set(NinjaTrader.Cbi.Provider[] value)    Unknown
     Microsoft.GeneratedCode!Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderLicenseData.Read5_LicenseData(bool isNullable, bool checkType)    Unknown
     Microsoft.GeneratedCode!Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderLicenseData.Read6_LicenseData()    Unknown
     [Native to Managed Transition]    
     [Managed to Native Transition]    
     System.Xml.dll!System.Xml.Serialization.TempAssembly.InvokeReader(System.Xml.Serialization.XmlMapping mapping, System.Xml.XmlReader xmlReader, System.Xml.Serialization.XmlDeserializationEvents events, string encodingStyle)    Unknown
     System.Xml.dll!System.Xml.Serialization.XmlSerializer.Deserialize(System.Xml.XmlReader xmlReader, string encodingStyle, System.Xml.Serialization.XmlDeserializationEvents events)    Unknown
     System.Xml.dll!System.Xml.Serialization.XmlSerializer.Deserialize(System.Xml.XmlReader xmlReader)    Unknown
     NinjaTrader.Core.dll!NinjaTrader.Cbi.License.Verify(System.Action<string, NinjaTrader.Cbi.InvalidCode, bool> errorCallback)    Unknown
     NinjaTrader.exe!NinjaTrader.AppHelper.OnStartup.AnonymousMethod__0(object o)    Unknown
     mscorlib.dll!System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state, bool preserveSyncCtx)    Unknown
     mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state, bool preserveSyncCtx)    Unknown
     mscorlib.dll!System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()    Unknown
     mscorlib.dll!System.Threading.ThreadPoolWorkQueue.Dispatch()    Unknown
    Tags: None
Previous 1 2 template Next

Latest Posts

Collapse
Topics Statistics Last Post
Copy Trading Pro – Master/Slave Trade Replicator by Geovanny Suaza
Started by Geovanny Suaza, 02-11-2026, 06:32 PM
0 responses
666 views
0 likes
 Last Post Geovanny Suaza
by Geovanny Suaza
02-11-2026, 06:32 PM  
RiskReward - multifunction by Geovanny Suaza
Started by Geovanny Suaza, 02-11-2026, 05:51 PM
0 responses
377 views
1 like
 Last Post Geovanny Suaza
by Geovanny Suaza
02-11-2026, 05:51 PM  
Toggle any plot or Object invisible Update by Mindset
Started by Mindset, 02-09-2026, 11:44 AM
0 responses
110 views
0 likes
 Last Post Mindset
by Mindset
02-09-2026, 11:44 AM  
CRT - CandleRangeTheory by Geovanny Suaza
Started by Geovanny Suaza, 02-02-2026, 12:30 PM
0 responses
575 views
1 like
 Last Post Geovanny Suaza
by Geovanny Suaza
02-02-2026, 12:30 PM  
TickHunter Trade Bot Indicator - Update by RFrosty
Started by RFrosty, 01-28-2026, 06:49 PM
0 responses
580 views
1 like
 Last Post RFrosty
by RFrosty
01-28-2026, 06:49 PM  
View All
Working...
X